The Sunspot 3600 is designed to deliver 3600 BTU per hour of cooling capacity and
optional 400 watts per hour of heating capacity
The Air handler is equipped with three 2” discharge vents standard. An optional 2” flange
kit is available when hoses are to be attached
The Sunspot 3600 uses dual 300 CFM fans to deliver optimal airflow and recirculation
The Sunspot 3600 uses R134A refrigerant and uses standard SAE service ports
Standard Warranty is 1 year full replacement
Available in 12, 24, 36, 48 and 72 VDC
Notes:
Alternator: Minimum 40 amp output alternator. If alternator is not at least 40 amps output,the
conditioner can potentially drain the main cranking battery and cause vehicle not to start.
Wiring/Fusing: Sunspot 3600 must be connected through a 50 amp fuse. Can be connected to
50 amp fuse in main fuse panel or connected to battery with provided 50 amp inline
recommended that the Sunspot 3600 be connected to a power source that is controlled by the
ignition “on” switch to prevent the AC unit from being left on when the vehicle is not being used.
Position: Sunspot 3600 must not be mounted greater than 10 degree angle to parallel.
Evaporator will not drain condensation properly if the mounting angle is greater than
10 degrees to parallel.
